1. Smoking and the use of open flames are strictly prohibited in the workshop of the single facer machine, and night shift personnel are strictly prohibited from lighting mosquito coils. It is strictly forbidden to dry clothes, objects, or heating on the top and bottom of the corrugated roller to avoid fire. The exposed part of the live conductor in the single facer machine should not be touched by the human body, and the control cabinet and electrical cabinet should not be opened at will to avoid electric shock accidents.

2. Always clean the dust on the electrical components of the single facer machine, and strictly abide by the principle of cleaning and maintenance after turning off the power supply, to prevent various safety hazards caused by short circuits caused by dust. All machine operators are strictly prohibited from wearing gloves, and should not put their hands close to the roller and corrugating roller.
3. During working hours, operators should tie their hair and clothes tightly to prevent safety accidents from being caught by machines such as single facer machines in operation. The single-sided machine operator should concentrate on working hours and should stop the machine immediately if the machine is found to be faulty during the operation, and should not operate with illness.
4. After the work of the single facer machine is completed, the pulp tray and pulp roller must be cleaned to prevent corrosion. When cleaning, the sizing mechanism needs to be moved backward before starting the pulp transport motor for cleaning. After getting off work, employees have to clean the fuselage, clean around the machine, fill the machine with oil at a fixed point, stop the machine when wiping with a cloth, and turn off the lights, fans, and electric motors of the circuit before leaving.
Through the above introduction and analysis of the Operating procedure of single facer machine, hope it helps you.