single facer_NEWS_Hebei Xinguang carton machinery manufacturing Co., Ltd.

11-18 

Positive pressure Single facer machine

For the positive pressure Single facer machine, a vacuum is formed on the scraping roller, the pasting roller, and the corrugating roller, and then air is blown in so that the corrugated paper is firmly pressed on the corrugating roller. In this case, the blowing force acts on the entire corrugating roller, and the suction force to the edge of the groove is much smaller than the traditional negative pressure.

11-11 

Negative pressure Single facer machine

Comparing positive pressure and negative pressure Single facer machine, the difference is 1: The adsorption type single facer machine mainly solves the problem of paper adsorption. After the paper enters the corrugating roller, the corrugating roller rotates at a high speed, which will generate an outward centrifugal force, which is very It is easy to throw out the corrugated paper, so the corrugated is not easy to form. Therefore, the principle of the equipment is to firmly adsorb the corrugated paper on the corrugated roller.

11-04 

Single facer machine safety operation rules

1. Smoking and the use of open flames are strictly prohibited in the workshop of the single facer machine, and night shift personnel are strictly prohibited from lighting mosquito coils. It is strictly forbidden to dry clothes, objects, or heating on the top and bottom of the corrugated roller to avoid fire.

10-28 

Introduction to the single facer

The single facer has been in use since the 1960s when the cardboard production industry was still in the manual stage. The design of the single facer at the time featured an angled roll arrangement with the pressure roll on top. This arrangement stems from the use of "guide jaws".

09-29 

Operating procedure of single facer machine

1. Smoking and the use of open flames are strictly prohibited in the workshop of the single facer machine, and night shift personnel are strictly prohibited from lighting mosquito coils. It is strictly forbidden to dry clothes, objects, or heating on the top and bottom of the corrugated roller to avoid fire. The exposed part of the live conductor in the single facer machine should not be touched by the human body, and the control cabinet and electrical cabinet should not be opened at will to avoid electric shock accidents.